2005 - 2007 Plug & Play Bypass SAIS Kit w/ PRP

SKU: V36HPRP
Price:
$404.00

Select Your Vehicle:
Qty: - +
   - OR -   

Please Select your Vehicle, Year and Engine in the drop down boxes before adding to your cart.

The Secondary Air Injection System Bypass Combo Kit - Plug and Play!

The bypass kit we recommend for most customers! If you don't want to splice or tap into your factory harness these kits are for you!

Plug and Play Combo Kit includes  the SAIS Bypass Plug and Play Module and a SAIS Pump Replacement Pack. Click on the images for more details!

     This Plug In version of the SAIS Bypass kit offers all the same features and benefits of the Original Wired Version but with super quick and labor saving Plug and Play Installation. All wiring connections except the starter relay connection are accomplished by the Plug and Play harness. Like the wired version, these kits prevent operation of the secondary air injection system at cold start. By preventing the SAIS from operating many of the trouble codes, CEL and Limp mode that are associated with a SAIS failure will not return once cleared. The Plug and Play Harness provides a very clean factory looking installation that allows for the bypass module to still be hidden out of plain sight.

     The SAIS Pump Replacement Pack is an Add-On to our popular SAIS Bypass Kits. Normally our SAIS Bypass Kits can’t clear a P0418 or P0419 but now they can with the additional installation of a Pump Replacement Pack. The other option for clearing a P0418/P0419 code after installing a SAIS Bypass kit is to replace the SAIS Air Injection Pump with a new and expensive unit. Detailed and illustrated Installation Instructions are easy to follow and include all details for each component of the Bypass Kit. That is a particularly expensive repair if you have to pay for the labor on a 4.7L engine where the Air Injection Pump is located under the intake manifold. Installing a Pump Replacement pack is much less expensive that having to replace an air injection pump and you can just leave the old faulty unit in place.

Here are the Common Trouble codes that the Standard Bypass Kit can illiminate:1441, P1442, P1444, P1445, P2440, P2441, P2442, P2443, P2445*, P2447, P0418 or P0419

For more information on trouble codes that Can and Cannot be cleared with the bypass kit alone... Please check our Trouble Codes Section .

Not Sure What You Need? Give us a Call TOLL FREE 1-844-307-7671 or Contact Us

The Plug and Play Deluxe Combo Kit Includes:

  •   1 x SAIS Bypass Module - Harnessed Plug In Connection
  •   1 x SAIS Pump Replacement Pack
  •   1 x Pair of Exhaust Valve No.2 Block Off Plates - Engine Specific (may be different than shown)
  •   1 x 10' Piece of Violet 20 AWG TXL - Starter Relay Connection Wire
  •   1 x Printed Copy - Detailed Bypass Module Installation Instructions
  •   1 x Printed Copy - Block Off Plate Instructions - Engine Specific
  •   1 x Printed Copy - Pump Replacement Pack Installation Instructions

Features:

  • Weatherproof connectors for Plug and Play convenience without the need to alter your factory wiring!
  • Black Poly Split Loom harness built with 3m™ Super 88+ Tape - Flame Resistant
  • Custom Made Compact Solid State Electronic Module
  • 4cm x 4cm x 1.4cm Black Duroplastic High Temp Enclosure - UL 94 V-0 Flame Resistance
  • High Quality Automotive Engine Compartment Grade TXL Wiring
  • The starter relay connection is an option ONLY available on The Original SAIS Bypass Modules.
  • 3M™ Automotive Acrylic Double Sided Tape for mounting
  • Black Epoxy Potted for environmental and shock protection
  • Assembled 100% by hand in the USA!
  • For use on Off-Road, Racing or other emissions exempt vehicles only.
  • 1/8" 316 Stainless Steel Block Off Plate Construction For Lifetime Use
  • Water Jet Cut for Precision and Smoother Edges, Guaranteed to Fit Your Engine

More About the SAIS Bypass Kit

     The bypass module is activated when the ignition is first switched to "ON" and any time it detects a 4-12V signal on the starter relay wire. The starter relay option is only available on the Original SAIS Bypass Modules! This option, when connected, ensures that the module actively prevents the SAIS from running on EVERY start. With the starter relay wire connected you can turn the ignition to "ON" for any period of time and the module will be active as soon as you crank the engine. Without the starter relay wire connection, you would need to turn the ignition back "Off" and then crank the vehicle to ensure the module is active or the system could operate and cause trouble codes and the CEL to come back on. Just install the kit with the starter relay wire connection and don't worry about having to start the engine as soon as you turn the key on! If anyone else drives the vehicle this is a Must!

     The included No.2 Exhaust Valve Block-off Plates are an integral part of the bypass kit (images may not match the plates you receive for your specific engine). The block off plates are the only way to isolate the exhaust valves and the related pressure sensor(s) from the exhaust. By completely isolating the system from the exhaust the pressure sensors are prevented from causing valve stuck open trouble codes which are the main cause of limp mode when this system fails. Even though a system is bypass and should never run again, the Exhaust No.2 valves can still leak exhaust and cause future trouble. Installing the block off plates is the only way to prevent future valve trouble and limp mode. Again, it is just best to install and forget about it.

The SAIS Pump Replacement Pack is an Add-On to our popular SAIS Bypass Kits. Normally our SAIS Bypass Kits can’t clear a P0418 or P0419 but now they can with the additional installation of a Pump Replacement Pack. The other option for clearing a P0418/P0419 code after installing a SAIS Bypass kit is to replace the SAIS Air Injection Pump with a new and expensive unit. That is a particularly expensive repair if you have to pay for the labor on a 4.7L engine where the Air Injection Pump is located under the intake manifold. Installing a Pump Replacement pack is much less expensive that having to replace an air injection pump and you can just leave the old faulty unit in place.

A SAIS Bypass Kit must be installed to use a Pump Replacement Pack.

SAIS Pump Replacement Pack

These packs install at the SAIS Air Pump Driver that is located on the driver's side inner fender well. There is no need to remove or replace the bad air injection pump when installing one of these packs.

P0418 - Relay 'B' Circuit Malfunction

P0419 - Relay 'B' Circuit Malfunction

The engines with smaller displacement than the 4.7L have only one air pump that can cause a P0418. Depending on year, the 4.7L engine can have one or two air pumps. A P0419 is only possible if you have a second air injection pump. The 5.7L engines all have 2 air injection pumps. For those vehicles with 2 air injection pumps, both air pump drivers will be located back to back on the inner driver’s fender. The Bank 1 Air Pump Driver (P0418) is located towards the rear of the vehicle and the Bank 2 Air Pump Driver (P0419 is located towards the front of the vehicle.

One SAIS Pump Replacement Pack is needed for each code i.e. if you have a P0418 and a P0419 you would need to install one pack on each Air Pump Driver.

Not Sure What You Need?

Give us a Call TOLL FREE 1-844-307-7671 or

Contact Us

Max on 06/03/2017 12:26am
Can't say enough about this product. I was getting codes 419 and 2442 and 07 Tundra wouldn't go over 40 mph. This would have been the third set of pumps in this vehicle. I got it overnighted and took my mechanic who charged me 2 hours labor to install and it has worked like a charm. After watching the videos, I realized I would have hard time getting to bank 2 pump. This all worked great and I have my Tundra back, thanks.
David Wilson on 03/14/2017 11:22am
These are great kits. Definitely spend the extra money for the Plug & Play w/ Pump Pack version to avoid any future check engine light. Labor time took me about 2.5 hours with 1/2 hour to put everything in loom to look factory neat...
Jacob on 07/10/2016 06:26pm
Anyone can sell a good product, but when you provide a quality product with amazing customer service that%u2019s what earns 5 stars.

The bypass kit was easy to install with great directions, and it cleared all my codes. Looks great just like OEM.

Paul though went above and beyond by staying in constant contact, answering my calls, and emails. I needed help with a problem not related to the bypass kit and he walked me though how to address it.

A all the way around. Definitely worth it.

Add Your Review


Your Name:
Email Address:
Review:
Note: HTML is not translated! Your email address will not be shared with anyone.
Your Rating: 5
Your Name:
Your Email:
Friends Name:
Friends Email:
Subject:
Message:
Related Products
Split Wire Loom
SKU: SWL
$5.00 $4.50
Split Wire Loom - Black. Protects wires from abrasion and crushing. Holds wires together and gives any wire installation a neat and cleanly installed look. The 1/4" loom is great for routing and securing a bypass kit's starter relay wire!
Inside Diameter:
iCarsoft TYTII (TYT II) Toyota Vehicles  Professional Multi-system Diagnostic Tool
SKU: iTYTII
$195.00 $185.25
A professional and powerful vehicle fault diagnosis tool specifically for Toyota Vehicles. 4" Full color screen and unique diagnostic software, it features full OBDII diagnostics and Toyota specific system access and trouble codes.
Pump Replacement Pack (PRP)
SKU: PRP
$155.00
5.0 Out Of 5 (5.0 on 1)
An alternative to replacing the SAIS Air Pump that is causing a P0418 or P0419. This is just a proxy for the bad pump must have bypass kit installed to use. Big labor/money saver! Must Be Installed With A Bypass Kit!