Installation Accessory Pack- Wired

SKU: IAW
In Stock Now!
Price:
$12.95

Qty: - +

Installation Kit!

Not Sure What You Need?

Give us a Call TOLL FREE 1-844-307-7671 or

Contact Us

We have combined all the accesories needed (tools not included) for you to install "The Original" SAIS Bypass Kit - Wired.

Included:

  • 1 x 1/4" 10' Split Wire Loom
  • 1 x Roll 3M Scotch Super 33+ Vinyl Electrical Tape
  • 2 x 1' Heat Shrinking Tubing
  • 12 x 6" Zip Ties

Details:

Heat Shrinking Tubing

3M® Polyolefin Heat Shrink Tubing  - Black - non-adhesive lined
2:1 Shrink Ratio 1/4" I.D. Shrinks to 1/8" I.D.
Perfect for covering 22Awg Wire wire splices and connections for the Wired Bypass Kits

Other diameters, colors and materials are available by special ordering for quantities over 100'

Other sizes available on request, let us quote your shop needs!

Split Wire Loom

Split Wire Loom - Black. Protects wires from abrasion and crushing. Holds wires together and gives any wire installation a neat and cleanly installed look.
The 1/4" I.D. is great for routing and securing a bypass kit's starter relay wire! It is also usually the same diamerter used for the factory IAT/MAF sensors.

Convoluted polyethelene tubing is resistance to automotive fluids and chemicals.

Wide operating temperature range from -40F to 200F.

10' of loom should be sufficient for installing the starter relay wire of our bypass modules. Handy for all kinds of projects so if you want to keep extra on hand you may want to order extra for your home or shop.

3M Scotch Super 33+ Vinyl Electrical Tape

Provides superior protection, thicker insulation and increased strength. Conforms and stretches to insulate and protect against abrasion, moisture and many chemicals.

Perfect for wrapping wires, insulating wire connections and securing wire loom.

Stays flexible during low outside temperatures and rated from -.4 F to 221 F (-18C - 105C)

Splice and insulate wires up to 600V.

Resists UV rays, abrasion, moisture, copper, corrosion, alkalies and acids.

Black polyvinyl chloride backing with rubber based adhesive.

Flame retardant, Lead Free.

Other diameters, colors and materials are available by special ordering for quantities over 100'

Other sizes available on request, let us quote your shop needs!

Not Sure What You Need?

Give us a Call TOLL FREE 1-844-307-7671 or

Contact Us

Currently there are no reviews for this product. Share your opinion with others, be the first to write a review.

Add Your Review


Your Name:
Email Address:
Review:
Note: HTML is not translated! Your email address will not be shared with anyone.
Your Rating: 5
Your Name:
Your Email:
Friends Name:
Friends Email:
Subject:
Message:
Related Products
2005 - 2007 Plug & Play SAIS Bypass Kit
SKU: V36H
$259.00
5.0 Out Of 5 (5.0 on 36)
The Hewitt-Tech SAIS Bypass Kit Plug and Play prevents operation of the SAIS at cold start thus letting you clear your related trouble codes, the CEL and Limp mode and installation made easy. Click here for more details!
Select Your Vehicle, Year, Engine:
2005 - 2007 Wired SAIS Bypass Kit
SKU: V36W
$168.00
5.0 Out Of 5 (5.0 on 12)
The Hewitt-Tech Wired SAIS Bypass Kit prevents operation of the SAIS at cold start thus letting you clear your related trouble codes, the CEL and Limp mode. Installs by wiring directly into the IAT/MAF Sensor harness. Click image for more details!
Select Your Vehicle, Year, Engine:
Pump Proxy Pack (PPP)
SKU: PPP
$155.00
5.0 Out Of 5 (5.0 on 1)
An alternative to replacing the SAIS Air Pump that is causing a P0418 or P0419. This is just a proxy for the bad pump must have bypass kit installed to use. Big labor/money saver! Must Be Installed With A Bypass Kit!