iCarsoft i800 Plus OBDII Code Reader
$65.00
The i800 Plus is a diagnostic tool by iCarsoft that easily allows for you to read and clear generic Diagnostic Trouble Codes.
24 in stock
Description
DESCRIPTION:
The i800 Plus is a diagnostic tool by iCarsoft that easily allows for you to read and clear generic Diagnostic Trouble Codes.
FEATURES:
- Works with all 1996 and newer cars & light trucks that are OBDII compliant (including the CAN, VPN, PWM, ISO and KWP2000 protocols).
- Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turns off check engine light.
- Supports multiple trouble code requests: generic codes, pending codes and manufacturer’s specific codes.
- Reviews the emission readiness status of OBD monitors.
- Retrieves VIN (Vehicle Identification NO.) on 2002 and newer vehicle that support Mode 9.
- Determines the malfunction indicator lamp (MIL) status.
- DTC Library to lookup when user is operating this tool.
- O2 Sensor test results for most recently performed tests from the vehicle’s on-board computer.
- Reads results of on-board diagnostic monitoring tests for specific components / systems.
- Evaporative System Test lets you initiate a leak test for the vehicle’s evaporative system.
- Saves and Reviews test results like I/M, Codes, Live Data and VIN.
- Upload and Prints saved data to PC.
- Battery Test shows the voltage of Data Link Connector (DLC), which is approximately the vehicle’s battery status.
- Easy to use with one plug-in; highly reliable and accurate.
- Easy to read crystal-clear backlit by display.
- Stand-alone unit with no need for an additional laptop computer to operate.
- Small in size and conveniently fits in your palm.
- Safely communicates with the on-board computer.
- No batteries needed, powered via detachable OBDII cable.
SPECIFICATION:
- Display: 2.8″ TFT LCD, 320*240 Pixels
- Operating Temperature: 0°C~50°C
- Storage Temperature: -20°C ~70°C
- Operating Voltage: 9 ~ 18V
- Operating current: 150mA@12V (Typical)
- Power consumption: 1.8W (Typical)
- Dimension: 142*90*22.5 mm (L x W x H)
OBDII FUNCTION:
- Read Codes
- Erase Codes
- I/M Readiness — I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
- Data Stream
- Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
- O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
- On-Board Monitoring — This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
- Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
- Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
- Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
- Turn off Check Engine Light (MIL), clear codes and reset monitors
- Read live PCM data stream
- Support CAN (Controller Area Network) and all other
- Multilingual menu and DTC definitions- English, Spanish, and German, etc
- Read pending DTCs
- Read permanent DTCs
- DTCs search
- Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
- Works on most of 2001 and later OBDII compliant PETROL European vehicles
- Works on most of 2004 and later OBDII compliant DIESEL European vehicles
- Works on most of 1996 and later OBDII compliant US and Asian vehicles
- View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
- Comprehensive Help, Including OBD Parameter, Mode Explanations & More
VEHICLE COVERAGE:
The Diagnostic Tool is specially designed to work with most OBDII compliant vehicles, including Controller Area Network (CAN). It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD II compliant and this includes all American, Asian and European vehicles. A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label, which is located under the hood or by the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate “OBD II Certified”. Additionally, Government regulations mandate that all OBD II compliant vehicles must have a “common” 16-pin Data Link Connector (DLC). For the vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
Note:
Verify tool functionality before purchasing. These tools are with no warranties or guarantees of functionality or vehicle compatibility. We do not accept returns and no refunds will be issued for these tools. Because of the actions of some buyers there are no exceptions to this policy as we are not a tool rental service or used tool retailer. This policy is also in our policies page that must be accepted as read before being able to purchase through our site.
Additional information
Weight | .625 lbs |
---|---|
Dimensions | 8.75 × 4 × 2.25 in |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.